Raspberry Pi Cobbler Plus $2.95 $4.95 Designed for use with Raspberry Pi Model A+/B+/Pi 2/Pi 3/Pi 4 only! No soldering required!This Cobbler is in a compact shape, which is the least bulky way to wire up. The Cobbler can plug into any solderless breadboard (or even a... Add to Cart
GPIO Header for Raspberry Pi - Extra tall 2x13 Female Header $2.75 Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.5 mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with... Add to Cart
Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit - MPR121 $20.95 This touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes. Capacitive touch... Add to Cart
5V 4 Channel SSR Solid-State Relay High Level Trigger 2A 240V $10.95 5V Four Channel SSR Solid Relay Module 240V / 2A - High Level Trigger - For Arduino Specifications Max. LoadAC: 240V Input Voltage: 5V DC Trigger Current: 2mA Dimensions: 2.28 in x 2.2 in x 0.94 in (5.8 cm x 5.6 cm x 2.4 cm) Weight: 1.34 oz (38 g) Add to Cart
Keyes IR Infrared Remote Control Kit $4.95 Transmission distance: >8m Effective angle: 60' Quiescent current: 3-5uA Dynamic current: 3-5mA Ideal for Arduino DIY project 17-key IR remote control Transmit 38KHz modulating signal PLEASE NOTE: The IR Receiver Module that comes with this remote... Add to Cart
Pimoroni Explorer HAT Pro for Raspberry Pi $31.95 The Explorer HAT Pro is a terrific prototyping side-kick for all Raspberry Pi boards with 40-pin GPIO's! (All boards except original B and B+ from 2014) On the Explorer Pro from Pimoroni there are a heap of useful input and output options that will take... Notify Me
Small Alligator Clip Test Lead (set of 12) $5.95 Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in... Add to Cart
Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit $24.95 The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these... Add to Cart
GPIO Stacking Header for Pi - Extra-long 2x20 Pins $2.95 $3.95 Connect your own PCB to a Raspberry Pi and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra... Add to Cart
GPIO Header for Raspberry Pi - 2x20 Female Header $1.95 Connect your own PCB to a Raspberry Pi with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with Adafruit's... Add to Cart
Tactile Button Switch (6mm) - 20 Pack $3.45 Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. They... Add to Cart
Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM $6.45 Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi Zero, A+, B+, Pi 2, Pi 3 and Pi 4 (any Pi with a 2x20 connector) with this jaunty prototyping HAT kit. To kick off the Adafruit HAT party, we have this Perma-Proto inspired... Add to Cart
Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM $9.95 Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit with EEPROM To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid... Add to Cart
SG90 180 Degrees 9G Micro Servo Motor Tower Pro $4.95 Weight : 9 g Size : 22 x 11.5 x 27 mm Operating Speed (4.8V no load): 0.12sec/60 degrees Stall Torque (4.8V): 17.5oz/in (1.2 kg/cm) Temperature Range: -30 to +60 Degree C Dead Band Width: 7usec Operating Voltage:3.0-7.2 Volts Add to Cart
SG5010 TowerPro Torque Coreless Servo 180 Degrees $16.95 This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with... Add to Cart
25 Tie-Points Solderless Breadboards (Pack of 6) with Baseplate $2.95 One Terminal Strip, Tie-point 25. Material: ABS plastic Completely reusable. Accepts a variety of wire sizes (29-20 AWG). Red,green,blue,yellow ,white,and black are available for... Add to Cart
40-Pin Data Cable for Raspberry Pi B+ $4.95 40 pin cable, 30cm in length. Cable type: female-female Add to Cart
MicroHOPE $14.95 $29.95 Please note: the packaging of the product (carton box) might be slightly unsound. The content of the kit is totally intact. MicroHOPE - A micro-controller development kit based on Atmel ATmega32. MicroHOPE supports coding in assembler & C language,... Add to Cart
Bright Pi - Bright White and IR Camera Light for Raspberry Pi $19.95 The Bright Pi is a breakout/add on board for the Raspberry Pi (can be used with other I2C devices too – Arduino etc.) which adds both visible bright white light and infrared illumination to the Raspberry Pi, for use with the Raspberry Pi camera... Notify Me
Assembled Pi Cobbler Plus - Breakout Cable for Raspberry Pi A+/B+/Pi 2/Pi 3 $7.95 The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably... Add to Cart