Monk Makes

A LiPo battery and charger board that charges automatically while you use your micro:bit! This neat solution to your micro:bit’s power needs comes with an acrylic layer enclosure to...

The Speaker Kit for Raspberry Pi is a great way of attaching a small amplified speaker to a Raspberry Pi. Raspberry Pi NOT included The kit includes: MonkMakes Amplified Speaker Set of...

The MonkMakes Relay for micro:bit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off. A micro:bit can turn an LED on and off directly, but...

This board, designed for use with the Lets Talk Science Living Space Project, provides a CO2, temperature and Relative Humidity measurements to a BBC micro:bit. Getting Started Wire-up the board to...

The MonkMakes RGB LED for micro:bit provides a colorful add-on to your micro:bit. Connect it up with alligator clips and then use the three outputs of your micro:bit to control the red, green and...

The 7-segment for micro:bit is a four digit 7-segment display for micro:bit. You can use it to display numbers, but it can also display letters and other characters, albeit with the limits imposed by...

MONK MAKES - PROJECT BOX 1 FOR RASPBERRY PI This kit contains everything you need (except a Raspberry Pi) to build 10 amazing electronics projects with your Raspberry Pi: Blinking...

With this kit, you get everything you need to start learning about connecting electronics to your micro:bit in an accessible and easy manner. Everything is connected using the supplied alligator...

The Squid Combo Pack comprises a Raspberry Squid RGB LED, two Squid buttons and a Raspberry leaf to help you identify the GPIO pins. A bright RGB (Red, Green, Blue) LED with built-in resistors and...

The Squid Button makes it super easy to attach a push switch to a Raspberry Pi. Note: Switch and lead colors may vary The Squid Button is in fact a momentary action push switch with...

Bright RGB LED with built-in resistors Female header leads Plug directly into the GPIO pins of a Raspberry Pi The Monk Makes Squid RGB LED for Raspberry Pi is a bright RGB (Red, Green,...

This kit allows you to connect the two included servo motors to your Raspberry Pi using the Monk Makes ServoSix interface board. The kit includes: 1 x Servo Six interface board 2 x 9g...

MonkMakes Protoboard is designed to make the creation of one-off projects and prototypes as simple to make as possible by: 1. Using the same layout as 400 point €˜half'...

The TEA5767 Breakout makes it possible to use TEA5767 FM radio receiver modules on breadboard. The breakout boards need you to solder your own TEA5767 module onto the board. Note that these are sold...

The MonkMakes Sensor Board for micro:bit allows you to sense sound level, temperature and light level. FEATURES 3V and GND connections can be made from either side and allow you to power a...

The MonkMakes Speaker for micro:bit is a neat little amplified speaker that connects to your micro:bit using alligator clips. Despite its small size, this speaker is pretty loud. Features Amplified...